The plan for the 2025 season was to compete in the three Nostalgia events, with the Toppling body; the aim was to consistently run good numbers; run consistently in the sixes; hopefully hit the magic 200mph.
But the best laid plans of mice and men…
2025 NSRA Nostalgia Nationals
By the end of our 2024 season, our cylinder bores were looking tired, and our connecting rods had done their time (self-imposed limit on number of runs); it was time to freshen the motor.
Our options were machine the bores + 0.010″, and order a set of custom-made pistons; or machine the bores +0.030″, for off-the-the shelf standard-oversize pistons:
Following discussions with our good friends at I.C.E. Automotive, we opted for the +30 route.
We were hoping to have our refurbished motor ready in time for the 2025 NSRA Nostalgia Nationals, but sadly our pistons didn’t arrive in time.
We had a plan B:-
We trawled through our boxes of used spares:
We assembled a short motor, using a Donovan block, that the great guys at Hamlins Engineering had repaired, following a previous unscheduled rapid disassembly; we utilised the oil pump, and the patched oil pan from the previous motor, wanting to preserve our billet pump and expensive pan for our ‘A’ motor.
Providing it held together, there was no reason why it shouldn’t be able to run low sevens.
At the NSRA Nostalgia Nationals we ran a 7.48 off the trailer, followed by a 7.21, a7.23, and another 7.21;
the puff of smoke as we crossed the finish line on the 4th run didn’t bode well: back in the pits, our worst fears were confirmed; a major piece of #3 connecting rod lay in the mangled oil pan.
On a positive note; the diaper did its job, and we didn’t oil the track.
Sadly, that was the end of our spare motor; no salvageable parts:
Thankfully, with some fine fettling, the cylinder heads will live on.
Rebuilding our 'A' motor
When we finally received our JE pistons, Rob Loaring was able to hone our bores, to suit.
We notched the rods to clear the crankshaft, and gapped the rings (not my favourite job!), before thoroughly cleaning the block ready for reassembly.
2025 Dragstalgia
With our fresh motor between the frame rails, we had high hopes of running some decent numbers.
This was Dragstalgia: as usual, we were the underdogs; competing against the big boys in the Nostalgia Cannonball.
Although our times and speeds were down from where they usually are, and not what we were hoping for, we completed all the scheduled runs:
Sometimes it’s better to be lucky than good; we’ll take that Cannonball third place!
2025 NSRA Hot Rod Drags
Running with the Supercharged Outlaws at the NSRA Hot Rod Drags